Deep Foundation
Dedicated to elevating standards of the foundation industry, we engineer, design and manufacture industry specific foundations safely and reliably.
![](http://abedwardconstruction.com/wp-content/uploads/2021/02/Push-Piers.jpg)
Why Magnum Push Piers?
The Highest quality push pier system available. We utilize this amazing plate bracket during the installation and it completely eliminates digging under the footer.
Push piers are used in conjunction with the Magnum ram. The ram simply fastens to the bracket by use of a safety bolt. Once the ram is safely secured to the bracket, you can begin driving one of our push pier sections. When push piers are used with plate brackets during install, it can eliminate digging under the footer.
How Does It Work?
The Magnum ram simply fastens to the bracket by use of a safety bolt. Once the ram is safely secured to the bracket, we can begin driving one of our push pier sections. The ID coupler makes for quick install as the tubing slides together and transfers the weight from one section to the next evenly.
After reaching and testing a load bearing stratum, the structure can be simultaneously lifted with the same rams the piers were driven with. When the lift or stabilization is complete, the Magnum Lock Off System makes for an easy completion of the pier.
With the ram still attached, the installer drills directly into the pier through predrilled holes in the collar. After fastening 1 to 3 bolts to ensure no movement of the pier, remove the rams and your job is complete.
1.) Expose and face footer even with the load bearing wall.
2.) Fasten the bracket to the footer using the proper amount of wedge anchors for the load.
3.) Secure the ram to the bracket with a safety bolt.
4.) Drive the 36” pier sections connecting them with the ID coupler system
5.) Once load bearing stratum is reached and has been held, use the same ram to lift the structure.
6.) After all piers are driven and tested, the same rams can be used to lift the structure.
7.) Drill pier and lock in place using the proper amount of bolts for the load.